Energy Saving Lighting Tips To Reduce Energy Consumption And To Brighten Our Homes
Fossil fuels that are non-renewable such as oil and coal are the one of the major sources that produce our electricity and run our industries. Much debate is going on about the consumption of these natural resources and how these affect the environment and global warming when these are burned and used.
And with oil prices soaring because of the turmoil in the Middle East, and with the aggravations brought about by the hurricanes that swept the country, it is but timely that we start saving energy. This does not only lessen the costs that we pay for our energy use but this can also allow us to help conserve the environment.
We can begin doing this with the following simple tips to have in order to save energy from lighting in our homes. Let’s start with two ideas in order to save from lighting energy when purchasing new light bulbs and replacing old ones.
The first tip is to change incandescent light bulbs to compact fluorescent light (CFL). A high efficient compact fluorescent gives energy saving light by reducing 20 to 30 percent the energy consumed by an incandescent light bulb.
Aside from this, it produces brighter light. A compact fluorescent of 20 watts can produce the same light of an incandescent bulb of 60 watts. It may cost more than a conventional light bulb but it is a long-term investment such that it can last 13 times longer.
In addition to this, when purchasing lights that saves more energy, buy compact fluorescent light bulbs that are qualified by Energy Star. Energy Star light bulbs are guaranteed to last for a minimum of 6,000 hours and were found to reduce the use of electricity to up to 75 percent.
According to EPA’s Energy Star, 1 trillion pounds of pollution can be reduced from the air if a single room in every American household uses an Energy Star qualified lighting product. Just think about the impact of such light that saves energy and at the same time, contributes to the anti-global warming campaign.
Aside from these two ideas, there are other ways of saving energy from lighting. The fastest way to reduce the use of power is by becoming energy efficient. Here are some guidelines we can follow in order to save energy from lighting:
The basic rule is to turn off the lights in rooms and areas that are not being used. It would be good to consider installing occupancy sensors or timers to reduce the number of time the lights are turned on.
Another way to save light energy is to avoid frequently switching light bulbs on and off because this shortens the bulb’s lifetime and consumes more electricity.
Use energy saving lighting such as fluorescents in places where they will be left on for some hours such as the hallway and living room.
Replace torcheries – the halogen lamps type – with compact fluorescent torcheries. Such torcheries can reduce the consumption of halogen torcheries from 60 to 80 percent. Aside from this, this type of light saving energy emits more powerful light than halogen types.
Another great way to save energy from lighting is to focus the light on the area where you will be working only. You can make use of three-way lamps to achieve this. With three way lamps, lighting levels will be kept low when it is not necessary.
Use compact energy saving light products such as fluorescents in all portable floor lamps and tables in your home.
Use fluorescent light with electronic ballasts and backing in workrooms such as the study area, laundry area and the garage. Electronic ballasts and backing saves energy from lights by reflecting their brightness in these rooms which also contributes in the reduction of additional lighting installations.
And the last tip to save energy from lighting products is to avoid exposing these outside. A bulb’s efficiency and brightness (it dims too much) can be affected by low and cold temperatures.
Aside from these tips and suggestions, there are other ways in order to increase the brightness inside the home which do not involve turning on switches and which can contribute in saving energy from lighting. Here are some of them:
In every corner of your home, try to take advantage in capturing natural light.
When painting the ceiling and walls of your house, opt for light colored paints. This makes the room brighter and allows you to save energy from artificial lighting. Wooden and stone floors can also help make a room brighter by reflecting natural light.
Tie back curtains and keep windows and its ledges clean to allow natural light to enter the room.
Lastly, the use of mirrors gives additional energy saving lighting to a room.